The best performance in Japan for typhoon resistance ceiling materials in summer, Genfix DMC (metal ceiling materials, ceiling reinforcement, wind pressure resistance ceiling materials, Grade 1 non-combustion resistance system, non-combustion ceiling materials, typhoon repair, typhoon damage, typhoon preparation, reinforcement cap)

 Hello, I'm Zenfix, a new value creator for the ceiling.




Do you remember last summer's typhoon?

There were a total of four typhoons that hit Korea, and Mysaku and Hyson, which were large typhoons, landed in a row.

Many places were damaged and repair work was carried out.



As time goes by, the typhoon is getting bigger and the damage is getting bigger.



Be prepared to prevent windows from breaking, such as attaching tape or wet newspapers to old fittings.

I'm sure you've seen it.



However, there is one more place to prepare for typhoons as well as broken glass.

That's the ceiling.


If the ceiling material falls off due to a typhoon, the risk of falling off due to the ceiling material increases.

The lightweight steel frame at the falling site is corroded, and the lightweight steel frame is also falling off.

It may be necessary to replace the lightweight steel frame in the future.



Therefore, they are well aware of the preparation for typhoons, and they seem to have to be prepared for ceilings.

Ceiling materials must be ceiling materials with wind pressure resistance test results to withstand typhoons.



DMC-H, which is attracting attention in a new way with DMC, the metal ceiling material of Jenfix.

All of them were tested for wind resistance tests. I'll tell you what the wind pressure test is like.

What is the wind pressure test?

"There is a pressure difference between the front and back of an outer member such as a wall or roof."

test for harmful effects on use

The test of wind resistance is to artificially create pressure differences in strong winds and to what extent the wind speed can withstand them.

It was conducted at the Korea Construction and Living Environment Test Laboratory in Seosan, South Chungcheong Province.


Construction of Cheongjangjae on a 2.4-meter-wide platform.





In this test, a one-piece cap was constructed as a reinforced cap along with DMC, a metal ceiling material of Zenpix.






"After all lightweight operations and ceiling construction, install wind pressure hoses on both sides of the table."

Adjust the wind pressure with a machine.


The test was carried out in the form of increasing the wind speed by 10 ms at regular intervals.



The DMC of Jenfix metal ceiling material held up the wind speed of 50 ms and lifted the wind pressure at 60 ms, and the one-piece cap fell off.

DMC metal ceiling material fell off.


Here, the wind speed of 50 ms is called the wind speed at which concrete buildings collapse.

The maximum wind speed of Typhoon No. 14 was 51.1 meters.

It's a ceiling material that can withstand wind speeds above that.



Before typhoons continue to occur more frequently and become more powerful,

There are more movements to prepare for it.

Many people don't know about the ceiling material yet, so after the typhoon,

Many people repair it because they regret it late.


However, it is not a post-damage repair work.

After confirming the report of wind pressure resistance test, when using appropriate ceiling materials,

I think I can keep additional expenses and safety in advance.



For product and construction inquiries,

via the following contact information or KakaoTalk chat

I will contact you after reading your blog.

If you contact us, we will respond more quickly and politely!



[Zenfix:1644-0487]













댓글

이 블로그의 인기 게시물

SMC천장재? DMC천장재? 그 차이점이 무엇인가요?[SMC/DMC/단가/난연/불연/준불연/천장재/천정재/용도비교/불연성/녹색인증/KS인증/재질/주차장천장/SMC시험성적서]

원룸, 필로티, 주차장 천장에 금속천장재 DMC 시공! [SDMC 천장공사 천정공사 원룸천장 천장보수 태풍 천장재 천정재 천정판 클립바시공 경량철골 SMC대체천장 불연천장재]