A large fire can be prevented by changing the ceiling material?! [First-grade non-combustion DMC metal ceiling material, first-grade SDMC ceiling material, and test report of non-combustion grade ]
Hello!👋
It's Zenfix, 'Creative New Value for the Ceiling'.
Today
Why should I use the smokeless first-class metal ceiling?
I'd like to tell you why I need to use the DMC ceiling and SDMC ceiling material of Zenfix.
-
Do you remember?
The fire at Eunmyeong Elementary School that broke out in June last year.
The fire that started in the garbage dump on the first floor of the annex moved to the ceiling.
There was a large fire that spread rapidly and spread upward through the outer walls of the building.
Fortunately, about 150 elementary school students and teachers who were in after-school classes were safely evacuated.
Except for two teachers who inhaled smoke, there were no major casualties.
*Fire-spreading Piloti structure
The annex building of Eunmyeong Elementary School was built in a so-called 'Piloti' structure that supports the first floor with pillars instead of walls.m. wall.
The first floor of the Piloti building is an open space.
Usually, a garbage dump outside the building was placed on the first floor, which was actually inside the building.
The first floor of the Piloti, which has only a pillar and is open to all sides, was exposed to oxygen, which made it easier for the fire to grow.
The material of the ceiling supported by the pillars was the SMC ceiling made of plastic that is vulnerable to fire.
As many as 19 cars were set ablaze when the melted SMC ceiling fell on a parked vehicle.
*Dry-bit finish on exterior walls that is highly flammable and acts as a flame thrower
The fire did not end the ceiling, but spread upward through the outer walls of the building.
Styrofoam-like insulation is attached to the exterior walls of the building, and on top of it, plaster or cement, etc.
This is due to the dry-bit finishing technique.
Dry-bit is a common construction method used in construction sites because it is easy to construct and does not cost much.
However, the styrofoam inside has a fire-prone property, which increases the risk of fire.
"If What if the ceiling was non-burnturning material?"
The ceiling of Floppy 1st floor at Eunmyeong Elementary School
Not the SMC ceiling made of plastic.
If it was a top 1 non-combustible DMC ceiling made of metal materials,
and the flames of fire on the ceiling;
The flames wouldn't have spread to Dry-bits on the outer walls of the building.
-
Even further past fires at the Jecheon Sports Center in 2017.
The fire that started in the first floor parking lot of the Piloti structure moves to the ceiling and sticks.
The black smoke spread quickly.
They're blocked by illegal parking, and fire trucks are having trouble getting in.
It was even more unfortunate that I missed the golden time.
Usually, the golden time in a fire situation is 3 to 20 minutes.
If the ceiling hold out during that time,
There would have been no major fire or tragic casualties.
that quickly collapsed, emitting black smoke.
The Piloti ceiling at Jecheon Sports Center is also vulnerable to fire.
It was a plastic SMC ceiling.
Zenfix has developed from the current non-burnt DMC .metal ceiling and SDMC metal ceiling
Many companies are also acquiring reports by manufacturing different components of the product that will receive the test report and the product that is actually being sold.
The reason is that it is difficult to meet the market unit price if cost reduction and proper production are made.
For example, when you make plastic SMC ceiling materials, if you mix a lot of glass fibers, you'll see semi-flammable products. This product is easily broken and has a high defect rate due to its low machinability, so some companies may only acquire second-grade semi-flammable grade reports and produce, sell, and distribute hard SMC ceiling materials with less glass fiber.
Zenfix publishes the test report and makes and supplies the appropriate products.
If you produce and sell products falsely without disclosing the test report, I think you should take responsibility accordingly.
Zenfix's first-class non-combustion DMC and SDMC metal ceiling, which have been proven to be non-burnt through specialized testing agencies, have a clear difference in performance from other second-grade semi-flammable metal ceiling materials.
There are several possible causes of fire. However, it is the ceiling that prevents this fire from spreading.
Buying time for children to evacuate safely under the guidance of the teacher.
Golden Time's time will increase, saving even one more life.
This can be achieved by first-class DMC metal ceiling and SDMC metal ceiling.
-
For more information, see the official Zenfix website below.
If you contact me via e-mail, I will answer you kindly.
THANK YOU!
http://www.zenfix.co.kr/
zenfixs@hanmail.net
댓글
댓글 쓰기